Hydraulic Press
Home> Products >Hydraulic Press
Description
  1. Main Features:

1)The Hydraulic press has three-beam and four-pole structure, which means economical and practical. Operation space is wide, and the movable bolster could be moved out of frame to set the die. The structure is simple and the appliance is also beautiful. Hydraulic control adopts plug-in valve system, which means reliable motion and long service life.

2)The press,, which could realize three-operation mode:

3)adjustment, manual and semi-automatic. The machine is applicable for metal sheet stretching and pulling, stretching, punching, bending. It is also used for pulling, stretching and pressing large-scale products. Presses offer fast, easy, and safe setup and operation as well as years of trouble-free service.

  1. Standard Equipment:
  • Plate Support Arms
  • Germany Bosch-Rexroth Hydraulic
  • Germany EMB Tubing connector
  • Germany Siemens Main Motor
  • Tele mecanique/Schneider Electrics
  • Hydraulic &Electrical overload protection
  • Top and Bottom Tooling(86°,R0.6mm)
  • Safety Standards(2006/42/EC):

  1. Safety Equipment:

    1.EN 12622:2009 + A1:2013        2.EN ISO 12100:2010      3.EN 60204-1:2006+A1:2009

  • Front finger Protection(Safety light curtain)
  • South Korea Kacon Foot Switch(Level 4 of safety)
  • Back metal safe fence with CE standards
  • Safety relay with Monitor the pedal switch and safety protection
Review


ver_code
1/3
X
Message Us
pop_close
pop_main
用户订阅